KISSlicer 1.6.3 profile for the CraftBot 3 dual

Hi, as asked in another post, here an start profile for KISSlicer and the CraftBot 3.
I used it a lot for a single extruder / petg, that's tweaked.
And earlier I made a profile to use PETG or PLA to print the model and SBS as support structure.
KISSlicer offers a lot of tweaks for extruder change, and that worked earlier, but I have to check if all commands still are ok with the latest firmware.
You can download it here, together with the Win64 exe. Mac and Linux available at the KISSlicer site.
You need a pro key of 42 dollar to use the dual and fancy settings.
Bart

April 6, 2019

Bartaar Bartaar
Service partner
1678 posts

2 replies


Hey Bartaar,

first of all i would like to thank you for your good contributions and the help!
Many of your contributions have helped me to use the CraftBot3 and also the software KISSlicer provided by you including your profiles has achieved by far the best print results so far.

Unfortunately since the last firmware update the printing with KISSlicer doesn't work any more - the print head moves very slowly in the direction of the wiper, extrudes into the empty area and after the initiation indicated in the Gcode also catches the printing of the object in the empty area (right front left, everything starting from the printing with the left extruder). I suspect a problem with the coordinate system, but could not fix it in the Gcode.

Can you help me or do you already have the current adjusted settings for the KISSlicer and would you kindly make them available again?

Thank you very much and best regards,
Felix

September 20, 2019

fxbgreen fxbgreen
Beginner
1 posts

Hello Felix,
I will update my CB3 and kick that KS CB3 profile to work again.
Bart

September 20, 2019

Bartaar Bartaar
Service partner
1678 posts
To start a discussion or reply to a post please Login or Create an account.