<?xml version="1.0" encoding="UTF-8" ?>
<rss version="2.0" xmlns:atom="http://www.w3.org/2005/Atom">
	<channel>
		<atom:link href="https://craftbot.com/rss" rel="self" type="application/rss+xml" />
		<title>Craftbot RSS | Firmware</title>
		<description>Craftbot Firmware releases</description>
		<link>https://craftbot.com</link>
		<copyright>2026 Craftbot.com All rights reserved</copyright>
		<pubDate>Tue, 31 Mar 2026 15:15:00 +0200</pubDate>
		<ttl>1800</ttl>
		<item>
			<title>[FIRMWARE] Craftbot FLOW Firmware V8677</title>
			<description><![CDATA[2026.03.27 CraftFlow
Pr3dator  v1.1.33255.0
CraftGui  v1.2.8677.1076
FlowAdmin v0.9.57

Firmware:
Added: Major rebuild
Fix:   A lot of bugfixes

New motion algorithm
New motor driver settings
Increased printing speed. Extruder and XY motors are now faster
Incerased volumentric flow with the MK2 extruder
Bugfixes: FMS sensor bugfix, BL-Touch sensor accurancy incereased, temp sensor stability fix, update process fix, ect.
New spped limits:
Up to: 3000mm/s^2 acceleration
Up to: 300mm/s print speed]]></description>
			<category>Firmware</category>
			
			<link>https://craftbot.com/firmware/download/Flow_firmware_2026-03-31</link>
			<guid>https://craftbot.com/firmware/download/Flow_firmware_2026-03-31</guid>
			<pubDate>Tue, 31 Mar 2026 15:15:00 +0200</pubDate>
		</item>
		<item>
			<title>[FIRMWARE] Craftbot CLASSIC Firmware 12611</title>
			<description><![CDATA[Release date: 2024.02.21.

Minor HMI communication fix]]></description>
			<category>Firmware</category>
			
			<link>https://firmware.craftbot.com/download/pr3Dator20240221</link>
			<guid>https://firmware.craftbot.com/download/pr3Dator20240221</guid>
			<pubDate>Wed, 21 Feb 2024 16:00:00 +0100</pubDate>
		</item>
		<item>
			<title>[FIRMWARE] Craftbot CLASSIC Firmware 12610</title>
			<description><![CDATA[Release date: 2023.06.08.

Fixed minor issue with proper printer detection]]></description>
			<category>Firmware</category>
			
			<link>https://firmware.craftbot.com/download/pr3Dator20230608</link>
			<guid>https://firmware.craftbot.com/download/pr3Dator20230608</guid>
			<pubDate>Thu, 08 Jun 2023 10:40:00 +0200</pubDate>
		</item>
		<item>
			<title>[FIRMWARE] Craftbot FLOW Firmware V8531</title>
			<description><![CDATA[2022.09.12 CraftFlow

Pr3dator  v1.1.26376
CraftGui  v1.2.8531
FlowAdmin V0.9.41

Firmware:
Added: xy motion speed has increased under calibration
Fix:   Minor bugfixes]]></description>
			<category>Firmware</category>
			
			<link>https://craftbot.com/firmware/download/Flow_firmware_2022-09-12</link>
			<guid>https://craftbot.com/firmware/download/Flow_firmware_2022-09-12</guid>
			<pubDate>Mon, 26 Sep 2022 10:00:00 +0200</pubDate>
		</item>
		<item>
			<title>[FIRMWARE] Craftbot FLOW Firmware V8530</title>
			<description><![CDATA[2022.05.27 CraftFlow

Pr3dator  v1.1.26208
CraftGui  v1.2.8530
FlowAdmin V0.9.32

Firmware:
Added: Wiper usage after first G28
Added: Temperature sensor measurement instability checking and warning. 
Fix:   Minor bugfixes]]></description>
			<category>Firmware</category>
			
			<link>https://craftbot.com/firmware/download/Flow_firmware_2022-05-27</link>
			<guid>https://craftbot.com/firmware/download/Flow_firmware_2022-05-27</guid>
			<pubDate>Wed, 08 Jun 2022 10:00:00 +0200</pubDate>
		</item>
		<item>
			<title>[FIRMWARE] Craftbot FLOW Firmware V8527</title>
			<description><![CDATA[Pr3dator v1.1.25996
CraftGui v1.2.8527
FlowAdmin V0.9.25

Firmware: 
Added:  Dome detect
Added:  Maintenance instructions
Fix:   Elimination of printed object height error when z-hop is applied
Fix:   Minor bugfixes

Flowadmin:
Added:  Better error handling
Added:  Fixed multiple unhandled error that may cause system crash from time-to-time (File manager, Storage size check, Pendrive size check)
Added:  Option to delete and remove saved Cloud storage access
Added:  Network connection checker and feedback display
Added:  More mobile friendly file list
Added:  Minor performance improvement
Fix:   Jogging click error
Fix:   Profile save/export error
Fix:   Pendrive check on cloud file manager pages
Fix:   Potential custom sound upload errors
Fix:   Custom sound preview playback in settings menu dropdown]]></description>
			<category>Firmware</category>
			
			<link>https://craftbot.com/firmware/download/Flow_firmware_2022-02-16</link>
			<guid>https://craftbot.com/firmware/download/Flow_firmware_2022-02-16</guid>
			<pubDate>Wed, 16 Mar 2022 10:00:00 +0100</pubDate>
		</item>
		<item>
			<title>[FIRMWARE] Craftbot CLASSIC Firmware 12610-19518</title>
			<description><![CDATA[Release date: 2022.03.02.

CB3 VERSION NUM: (not changed)
CB2 VERSION NUM: 
Pr3dator: 1.1.12610
HMI:      1.1.19518

CB2/CBP CHANGES:

	On pr3dator board the ATSAM3X4E supported.
	Pr3dator v3.2 board supported.
	HMI v3.2 board supported.
	Added confirmation message before starting movements.
	Text fixes.
	German language corrections.
	In report menu the serial number last character (9) bug fixed.
	Minor bug fixes.]]></description>
			<category>Firmware</category>
			
			<link>https://firmware.craftbot.com/download/pr3Dator20220201</link>
			<guid>https://firmware.craftbot.com/download/pr3Dator20220201</guid>
			<pubDate>Wed, 02 Mar 2022 16:00:00 +0100</pubDate>
		</item>
		<item>
			<title>[FIRMWARE] Craftbot FLOW Firmware V8522</title>
			<description><![CDATA[2021.11.08 CraftFlow

Pr3dator  v1.1.25838
CraftGui  v1.2.8522
FlowAdmin V0.9.13

Firmware: - !!!! Recalibration required !!!!
Added:   Online support
Added:   WiFi password with space
Added:   Romanian language
Added:   Bed heat balance waiting
Fix:     Extruded length calculation
Fix:     Mesh Bed 1st layer
Fix:     Online update 
Fix:     Flash drive mount
Fix:     RGB logo usage
Fix:     Minor bugs

Flowadmin:
Added:   Remote web access
Added:   Cloud file storage access
Added:   code viewer
Added:   Upload print history to craftbot.com account
Added:   Custom sounds for events
Added:   Export and import printer settings
Added:   Firmware update check
Fix:     Redesign
Fix:     Minor bugfixes]]></description>
			<category>Firmware</category>
			
			<link>https://craftbot.com/firmware/download/Flow_firmware_2021-11-08</link>
			<guid>https://craftbot.com/firmware/download/Flow_firmware_2021-11-08</guid>
			<pubDate>Mon, 08 Nov 2021 09:00:00 +0100</pubDate>
		</item>
		<item>
			<title>[FIRMWARE] Craftbot FLOW Firmware V8512</title>
			<description><![CDATA[2021.09.13 CraftFlow

Pr3dator  v1.1.25799
CraftGui  v1.2.8512
FlowAdmin V0.8.19

Firmware: - !!!! Recalibration required !!!!
Fix:   Motor driver false error indication fixed
Fix:   Static ip settings fixed
Fix:   Minor bugs]]></description>
			<category>Firmware</category>
			
			<link>https://firmware.craftunique.com/download/Flow_firmware_2021-09-13</link>
			<guid>https://firmware.craftunique.com/download/Flow_firmware_2021-09-13</guid>
			<pubDate>Mon, 13 Sep 2021 00:00:00 +0200</pubDate>
		</item>
		<item>
			<title>[FIRMWARE] Craftbot FLOW Firmware V8474</title>
			<description><![CDATA[2021.03.17 CraftFlow

Pr3dator  v1.1.25642
CraftGui  v1.2.8474
FlowAdmin V0.8.19

Firmware: - !!!! Recalibration required !!!!
Added: HMI and predator code refactoring
Added: Added tutorial videos to the calibration steps
Added: The machine recalculates the speed estimate when you set the speed while printing
Added: The dome fan speed is taken over from the gcode when printing continues
Added: S-curve motion control
Added: Modified acceleration and deceleration ramp
Added: Extruder unload speed decreased
Added: X motor current tuning during boot
Added: The Z axes movement speed has been increased in Jog menu
Added: Z offset calibration has further fine tuned
Added: Reverse tray calibration due to successful calibration 
Added: Bed compenzation with filament flow in mirror or paralell print mode
Added: New personalised menu item: Moving the build plate down if the printing is interrupted
Added: Checking the USB port before firmware update to avoid update problem
Added: Mesh compensation is now distributed in 20 mm
Added: The dome fan lockable during the print menu
Added: Pr3Dator board update is added to the update menu. It is visible only when the Pr3D board version differs than the expected version
Added: The email alerts list has been expanded
Added: M117 support added
Added: E-mail style updated
Fix:   False bed temperature sensing has been fixed
Fix:   Motor driver false error indication fixed
Fix:   Minor bugs

FlowAdmin:
Added: Browser will remember login even if printer is restarted
Added: Added another file browser to the top of file manager list
Added: Redirect to dashboard after successful print start
Added: Kick to login screen if session timed out
Fix:   Small fixes and improvements

################################################################################
2020.09.17 CraftFlow

Pr3dator v1.1.24338
CraftGui v1.1.6622
FlowAdmin V0.8.9


Firmware:
Fix:   Hot bug fix


################################################################################
2020.07.24 CraftFlow

Pr3dator  v1.1.24329
CraftGui  v1.1.6619
FlowAdmin V0.8.9

Firmware:
Added: Webadmin HMI communication functions extended.
Added: GUI recovery scripts added.
Added: Layer count and Z position info added to the print screen.
Added: Default door temperature treshold set to 60C.
Added: Print time estimation routine reworked.
Added: Status/log files expanded width mesh bed values.
Added: Extended storage of printed data in a local database that can be saved to a flash drive.
Fix:   Minor bugs

FlowAdmin:
Added: Printer overlay message / dialog display, handle and response from FlowAdmin
Added: Print history display with every event
Fix:   Option for cookie timeout, fix the forced 15 minute cookie timeout bug
Fix:   Fixed age old bug where left buttons / menu disappers for some reason
Added: Faster stored data read
Fix:   Fixed socket message timeout / wait bug
Added: Simplified boot up sequence
Added: Printer calculated ETA used when present
Added: Huge settings / control / print settings update
Fix:   Fixed file manager security / session issue
Added: Removed unncecessary ajax/file calls on dashboard
Added: New e-mail template
Added: Toggle temp chart visibility
Added: Multiple other minor changes


################################################################################
2020.06.12 CraftFlow

Pr3dator  v1.1.24276
CraftGui  v1.1.5863
FlowAdmin V0.7.21

Firmware:
Added: At the end of printing, the video continues to be recorded for a few seconds to prevent the video from ending abruptly.
Added: The system time and date can also be set offline in the timezone menu.
Added: The machine supports for EXFAT file systems on mounted media.
Added: The info menu has been expanded with the Report tab. Mesh level and status values can be saved to media.
Added: Startup wizard has been expanded with SMTP settings.
Added: Calibration menu has been expanded to sub-items.
Added: The machine performs an assisted bed measurement before printing. This can be enable or disable in the personalized menu.
Added: During printing when remove flash drive the machine goes pause state and a warning message appears in display.
Added: Extruder fan control frequency has modified (from 26 Khz to 150 kHz ). 
Fix:   Minor bugs

FlowAdmin:
Fix:   Minor bugs



################################################################################
2020.04.30. CraftFlow

Pr3dator  v1.1.23925
CraftGui  v1.1.5353
FlowAdmin V0.7.16

Added: New languages: Spanish, Italian
Added: Now the calibration status is indicated in the Calibrate menu.
Fix:   The PID algorithm has been modified to avoid overshootings when changing temperatures.
Fix:   False thermal fault indications have been fixed.
Fix:   It is not possible to extrude in the print menu only when there is a pause state.
Added: FMS sensitivity is now adjustable
Fix:   The "Case fan does not rotate" false error signal fixed.
Added: Dome fan does not rotate error detection implemented.
Added: Now the door can be opened during calibration and printing
Fix:   Time-lapse video recording has been reworked. The machine on the fly generates video without images.
Added: Cold extrusion warning message implemented.
Added: Personalized options have been expanded. You can choose the printer go to the pause position or not if the door opens during printing.
Fix:   During update the "Main board flash operation failed" have been fixed.
Fix:   Heads YX calibration procedure modified: now it is easier finds the calibration hole.
Fix:   Static ip settings screen freeze fixed.
Fix:   parameters are not deleted after update
Fix:   False battery fault indication have been fixed.
Added: The cover fan can be adjusted during printing.
Added: You can also open the door during calibration or printing if the conditions are right.
Fix:   Update menu has been modified. There is no rescan button.
Fix:   The "No buildplate installed" false error signal fixed.

FlowAdmin: 0.7.16
Fix:   Remote web connection fixes
Added: Added "Stop heating" to in progress printing sliders
Fix:   Removed video playback popup button on mp4-s in file manager
Fix:   Status check error handling
Fix:   Typo fixes

Other UI fixes have been made.
After updating, recalibration is required due to changes!!!
]]></description>
			<category>Firmware</category>
			
			<link>https://firmware.craftunique.com/download/Flow_firmware_2021-03-18</link>
			<guid>https://firmware.craftunique.com/download/Flow_firmware_2021-03-18</guid>
			<pubDate>Thu, 18 Mar 2021 00:00:00 +0100</pubDate>
		</item>
	</channel>
</rss>